Ajantha Partitions :
 
  • Ajantha
  • Designs&colors
  • Specifications
  • Cross Section
Content 1
Designs
Colors
       
Blue   Ivory  
       
Brown   Black  
 

Supply and fixing of partitions made of seccolor pre-painted steel (base steel as per IS 513 of 0.58 mm thick ‘D’ quality, galvanized as per IS 277 with Zinc of 120 GSM).  Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick alkyd backer. 

Section for outer frame should be 46x52mm, section for shutter should be 46x46mm, section for mullion should be 46x70mm, section for beading should be 18x25mm and section for middle and bottom rail (Lock Rail and Kick Rail) of size should be 23x130mm. 

The partition should be paneled with 9mm pre-laminated particle board to a height of 0.91m from the bottom, and remaining height with 5mm thick plain glass With Ethyl Propylene Diamine Monomer (EPDM) Gaskets.  The sections are to be cut to length, mitre joined with corner bracket Centre mullions are to be fixed using mullion cap.  Gaskets made of Ethyl Propylene Diamine Monomer (EPDM). Corner brackets made of CRCA with zinc phosphate.  Mullion caps made of Glass filled nylon. 

The above frames should be fixed to the concrete/masonry wall by means of self expanding screws, and complete for finished item of work

   
   
 
 
 
 
 
 
Copy rights reseved by : NCL Seccolor Pvt.Ltd      
..