Materials >>
Prepainted Steel
Powder Coated Steel
Hardware
 
 
  Pre painted steel:
  Cold rolled  steel coil made up of base steel as per IS 513 grade “D” quality, galvanized as per is 277 with zinc coating of 120 grams/sq.mtr. it should be with primer coat of epoxy primer of 5-7 microns thick, finish painted with polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns
 

SeccoPlus Casement windows  available in Ajantha & eco 4000 series with provision for grill and fly mesh shutter


High in UV Resistance

  • IS 513 CRCA steel
  • 120 GSM Zinc as per IS 277
  • 5-7 Microns of Epoxy Primer
  • 10-14 Microns of Base coat plus 10-14 Microns of wood texture coat
  • 5 -7 Microns of Alkyd backer
  • Polyethylene film

Quality Assurance

  • Erichsen Cupping Test                   : 6.0 mm
  • Bend Test                                     : 3T Pass
  • Impact Test                                   : 60 Inch-pound Pass
  • Cross Hatch Test                           : Pass
  • QAV Resistance Test                     : 750 Hrs
  • Solvent Resistance (MEK) Test       : Pass
  • Humidity Test                                 : 500 Hrs Pass
  • Salt Spray Test                               : 500 Hrs Pass
  Powder coated steel:
  Cold rolled  steel coil made up of base steel as per IS 513 grade “D” qualityl, galvanized as per is 277 with zinc coating of 120 grams/sq.mtr.  The roll formed section  should be powder coated with pure polyester powder up to 50-60 microns thick.
  Hardware:
  Doors & windows of seccolor range are assembled with high quality hardware made of either with high grade aluminum, crca electroplated  or glass filled nylon. Gasket is made up of ethyl  propylene diamine monomer (EPDM). All the hardware is made by exclusive suppliers and 100% quality assured.
   
 
 
 
 
 

..

 
Copy rights reserved : NCL Altek & Seccolor .Ltd